 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 * Fax : 760-564-2414 1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com SA5.0 THRU SA180CA GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-5.0 TO 180.0 Volts 500 Watt Peak Pulse Power FEATURES * Plastic package has Underwriters Laboratory Flammability Classification 94 V-O * Glass passivated junction * 500W Peak Pulse Power capability on 10/1000 s waveform * Glass passivated junction * Low incremental surge resistance * Excellent clamping capability * Repetition rate (duty cycle): 0.01% * Fast response time: typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0ns for bidirectional and 5.0ns for bi directional * Typical IR less than 1A above 10V * High temperature soldering guaranteed: 300C/10 seconds/ .375", (9.5mm) lead length, 5lbs., (2.3kg) tension MECHANICAL DATA Case: JEDEC DO-15 Molded plastic over glass passivated junction Terminals: Plated Axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denoted positive end (cathode) except Bipolar Mounting Position: Any Weight: 0.015 ounces, 0.4 grams DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA Suffix for types SA5.0 thru types SA180 (e.g. SA5.0C, SA180CA) Electrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25C ambient temperature unless otherwise specified. RATING Peak Pulse Power Dissipation on 10/1000 s waveform (NOTE 1, Fig.1) Peak Pulse Current of on 10/1000 s waveform (Note 1) SYMBOL PPPM IPPM VALUE Minimum 500 SEE TABLE 1 UNITS Watts Amps Watts Steady State Power Dissipation at TL = 75C Lead PM(AV) 3.0 lengths .375", 9.5mm (Note 2) Peak Forward Surge Current, 8.3ms Single Half Sine-wave IFSM 70 Superimposed on Rated Load, Unidirectional only (JEDEC Method)(Note 3) Operatings and Storage Temperature Range TJ, TSTG -55 +175 NOTES: 1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 C per Fig.2. 2. Mounted on Copper Pad area of 1.6x1.6" (40x40mm) per Fig.5. 3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum. Certified RoHS Compliant UL File # E223026 Amps C MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 * Fax : 760-564-2414 1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com RATING AND CHARACTERISTIC CURVES SA5.0 THRU SA180CA 100 Fig.2-Power Derating Curve Peak Pulse Power (P ) or Current (IPP) PP Derating in Percentage,% Pig.1 - Peak Pulse Power Rating Curve 100 87.5 75 62.5 50 37.5 25 12.5 0 0 25 50 75 100 125 150 175 200 30 Non-repetitive Pulse Waveform shown in Fig. 3 TA=25C PPPM-Peak Pulse Power 10 1 PPK".5" td PPK td Impulse Exponential Decay Half Sine td=7tp 0.1 PPK td Square Current Waveforms 0.1s 1.0s 10s 100s 1.0ms 10ms 1000 TA - Ambient Temperature (C) td - Pulse Width (sec.) Fig.3 - Pulse Waveform 150 tr = 10sec. IPPM - Peak Pulse Current,% IRSM Peak Value IPPM TJ = 25C IFSM-Peak Forward Surge Current (A) 100 Pulse Width(td)is defined as the point where the peak current decays to 50% of IPPM Fig.6 - Maximum Non-Repetitive Forward Surge Current Uni-Directional Only 200 8.3ms Single Half Sine-Wave (JEDEC Method) 100 Half Value- IPPM 2 50 10/1000sec.Waveform as defined by R.E.A. td 0 0 1.0 2.0 3.0 3.0 4.0 4.0 10 1 10 100 t - Time(ms) Fig. 5 - Steady State Power Derating Curve 4.0 10000 Number of Cycles at 60 Fig. 6 - Capacitance 10000 Unidirectional Bidirectional PM(AV),Steady State Power Dissipation (W) 3.0 CJ - Capacitance (pF) L=0.375" (9.5mm) Lead Lengths 1000 1000 VR = 0 TJ = 25C f = 1MHz Vsig = 50mV p-p 2.0 1.0 1.6x1.6x.040" (40x40x1mm) Copper Heat Sinks 0 0 0.2 0.4 0.6 0.8 1 100 100 VR = Rated Stand-off voltage 1.2 TL - Lead Temperature (C) 10 0 10 0.2 5 0.4 0.6 0.8 1 500 1.2 Reverse Voltage (V) MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 * Fax : 760-564-2414 1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com 500 Watt TVS MAXIMUM BREAKDOWN BREAKDOWN PEAK TEST REVERSE CLAMPING VOLTAGE VOLTAGE PULSE CURRENT STANDOFF UNI-POLAR BI-POLAR VOLTAGE @IPP CURRENT VBR (V) MIN. (IT ) VOLTAGE VRWM VBR (V) IPP (A) @ IT MAX. @ IT VC (V) mA (V) REVERSE LEAKAGE @ VRWM IR (A) SA5.0A SA6.0A SA6.5A SA7.0A SA7.5A SA8.0A SA8.5A SA9.0A SA10A SA11A SA12A SA13A SA14A SA15A SA16A SA17A SA18A SA20A SA22A SA24A SA26A SA28A SA30A SA33A SA36A SA40A SA43A SA45A SA48A SA51A SA54A SA58A SA60A SA64A SA70A SA75A SA78A SA85A SA90A SA100A SA110A SA120A SA130A SA150A SA160A SA170A SA180A SA5.0CA SA6.0CA SA6.5CA SA7.0CA SA7.5CA SA8.0CA SA8.5CA SA9.0CA SA10CA SA11CA SA12CA SA13CA SA14CA SA15CA SA16CA SA17CA SA18CA SA20CA SA22CA SA24CA SA26CA SA28CA SA30CA SA33CA SA36CA SA40CA SA43CA SA45CA SA48CA SA51CA SA54CA SA58CA SA60CA SA64CA SA70CA SA75CA SA78CA SA85CA SA90CA SA100CA SA110CA SA120CA SA130CA SA150CA SA160CA SA170CA SA180CA 5.00 6.00 6.50 7.00 7.50 8.00 8.50 9.00 10.00 11.00 12.00 13.00 14.00 15.00 16.00 17.00 18.00 20.00 22.00 24.00 26.00 28.00 30.00 33.00 36.00 40.00 43.00 45.00 48.00 51.00 54.00 58.00 60.00 64.00 70.00 75.00 78.00 85.00 90.00 100.00 110.00 120.00 130.00 150.00 160.00 170.00 180.00 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.00 11.10 12.20 13.30 14.40 15.60 16.70 17.80 18.90 20.00 22.20 24.40 26.70 28.90 31.10 33.30 36.70 40.00 44.40 47.80 50.00 53.30 56.70 60.00 64.40 66.70 71.10 77.80 83.30 86.70 94.40 100.00 111.00 122.00 133.00 144.00 167.00 178.00 189.00 200.00 7.00 7.37 7.98 8.60 9.21 9.83 10.40 11.10 12.30 13.50 14.70 15.90 17.20 18.50 19.70 20.90 22.10 24.50 26.90 29.50 31.90 34.40 36.80 40.60 44.20 49.10 52.80 55.30 58.90 62.70 66.30 71.20 73.70 78.60 86.00 92.10 95.80 104.00 111.00 123.00 135.00 147.00 159.00 185.00 197.00 209.00 233.00 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 137.0 146 162 177 193 209 243 259 275 289 55.4 49.5 45.5 42.5 39.5 37.5 35.4 33.1 30.0 28.0 25.6 23.7 22.0 20.9 19.6 18.5 17.5 15.7 14.4 13.1 12.1 11.2 10.5 9.6 8.8 7.9 7.3 7.0 6.6 6.2 5.9 5.4 5.3 5.0 4.5 4.2 4.0 3.7 3.5 3.1 2.9 2.6 2.4 2.1 2.0 1.9 1.7 600 600 400 150 50 25 10 5 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 For bidirectional type having Vrwm of 10 volts and less, the IR limit is double. For parts without A , the VBR is 10% Certified RoHS Compliant UL File # E223026 |
Price & Availability of SA60CA
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |